Delorean Electric Window Regulator Removal or Replacement

(29/04/2015, Type: Problem Fix)   View other Articles   DMC-12 Home   [Add Your Own Article]

Share on Google+

This guide will show you how to remove or replace Delorean electric window regulator.
Warning: Edges of the door can be very sharp.

First remove the door panels as shown in this guide:
Delorean Door Panel Removal Guide

Delorean Window Regulator Removal

Remove the four screws that secure the handle bracket to the door. Also remove the 10mm nut that secures the regulator to the bracket.

Delorean Electric Window Regulator Removal

Remove the screws circled below to free the regulator from the door.

Delorean Electric Window Regulator Removal

The regulator is now unsecured from the door so you can remove the nuts from the window. You should be able to push the window down slightly as the regulator can move and gain access to the nuts. If your regulator does work you can move the window down with the switch.

Delorean Electric Window Regulator Removal

Move the regulator to allow access to the screw below through the screw hole in the door, then remove the screw.

Delorean Electric Window Regulator Removal

Move the regulator to allow access to the screw below through the screw hole in the door, then remove the screw.

Delorean Electric Window Regulator Removal

Remove the bracket from the door.

Delorean Electric Window Regulator Removal

Undo the electric block connectors on the regulator.

Delorean Electric Window Regulator Removal

Pull the regulator plastic tube out as shown below.

Delorean Electric Window Regulator Removal

Remove the regulator by holding each end and guiding it out of the door.

Delorean Electric Window Regulator Removal

Created By: Michael     View Other Articles By Michael


[Add Comments]

NO COMMENTS LISTED